These products combine the performance advantages of silicone with processing speed of UV cure. Product characteristics span the gamut from very thin coatings to a paste-like consistency. All formulations are 100% solids, so there are no solvents to handle, or report. Dual cure products offer assurance that shadow areas will fully cure. No sub-ambient storage is required.
Two component, unique addition cure silicone gels formulated for potting and encapsulation. Products are noted for exceptionally fast cure times, convenient mix ratios, solvent free formulations, and no by-products generation. They are optimized for junction box enclosures, cable splice kits, electrical insulation and a plethora of potting and encapsulation applications.
Single component, neutral cure non slumping products that are non-corrosive when tested in accordance with Mil-Spec A-46146B. They are ideal for applications that require quick cure and early green strength development on electronic components, circuit boards and other sensitive components.
Single component, oxime cure, non flowable products that offer excellent adhesion to numerous substrates including plastics and metals. They offer outstanding resistance to gasoline, brake fluid, anti-freeze and most wheel cleaners.
Single component, oxime cure, non flowable products that cure to a solid rubber like normal RTV silicone except with low adhesion. They are ideal for creating formed-in-place gaskets where re-entry or post-production disassembly is necessary.
Single component, oxime cure, non flowable paste products that provide fast tack-free time and high green strength. These fast cure products out-perform slower materials in multi-step assembly applications. The fast tack and early strength combine to hold the assembly together as the unit moves from station to station.
Single component, oxime cure, non flowable products that offer an excellent balance between rate of cure, adhesion and physical properties. Good adhesion to metal, glass, ceramic, rubber, most plastics and dissimilar substrates. Typical applications include waterproofing electrical components, protecting instrumentation assemblies, sealing coaxial connectors, and formed in place gaskets.
Self-levelling, single component, oxime cure silicones for use in applications where the coating needs to flow into small crevices and hard to reach areas. Typical applications include coating intricate electrical and mechanical devices, insulating electrical terminals, and thin section potting. These products have good adhesion to most common substrates, and will not corrode aluminum, copper and ferrous metals.
Single component, acetoxy cure silicone sealants and adhesives that may be used for most common bonding and sealing applications. These products are thixotropic pastes that will not run or sag; which may be applied overhead or on vertical surfaces. Acetic acid is released during curing which may be harmful to some acid sensitive substrates. Products are NSF 51 certified and conform to FDA requirements.