UV Curing Conveyor Systems

UV6 is a bench-top or stand-mounted UV light curing system, designed for laboratory or high volume production applications. The conveyor features a quiet variable speed motor, with a velocity regulating drive that keeps the belt speed constant for varying loads. The system can be configured with single or dual high-intensity lamp heads UVR400 or UVR800, which can be easily removed and reconfigured as stand-mounted systems for increased versatility.

Features

Adjustable Lamp Height

Lamp height can be adjusted from 1.5 to 7.5 inches depending on the selection of light source.

Full UV Shielding

The conveyor light chamber is totally enclosed, shielding the operator and passers-by from any UV radiation.

The light chamber entrance and exit are protected by sliding doors with extended hoods.

Adjustable End Chute

The system has an adjustable position and chutes for accumulating cured parts as they exit the conveyor.

Exhaust Port

The light chamber has a top-mounted 3″ diameter port, for optional venting to facility exhaust systems.

Light Sources

The conveyor can accommodate both Technodigm’s UV Lamp and UV LED Light sources.

Specifications

Light SourceSingleDual
Belt Width9″9″
Curing Width6″6″
Belt Speed, ft/minute8 ~ 156 mm / s8 ~ 156 mm / s
Dimension L
(Include W
Blower) H		39″ (100cm)
25″ (63cm)
23″ (58cm)		51″ (130cm)
25″ (63cm)
23″ (58cm)
Input Power220VAC, 50/60 Hz220VAC, 50/60 Hz