TechnoDigm’s SPV200 is a pneumatic valve that has been designed specifically to address dripping and tailing issues effectively. The internal design creates a suck-back effect as opposed to standard piston valves.
This feature also enables the user to control the amount of suck-back via an adjustment knob on top of the valve. It is an effective valve for dispensing medium to high viscosity epoxies and adhesives such as RTV, grease, gasketing epoxies, and high viscosity sealant.
|Operating Air||Pressure 5.0 – 7.0 bar|
|Maximum Fluid Pressure||7.0 bar|
|Material Inlet||Metal Female Luer or Compression fitting|
|Material Outlet||Male Luer Adaptor to 1/4″-28 UNF|
|Suck-back Stroke||1 mm (Max. 2 turns)|
|Flow Rate||5.0 l/min|
|Actuator Body||Stainless Steel|
|Wetted Chamber||Stainless Steel|
|Cycle Rate Exceeds||400 cycles/min|
|Range of Temperature||5 ~ 50 °C|