SCS4000 Selective Conformal Spray Coating System

Selective Conformal Spray Coating System is a programmable selective coating system that allows you to dispense only on required areas to reduce cycle time and eliminate the need for masking. It comes with various types of spray heads to cater to different coating material and spraying profile.

Selective Conformal Spray Coating System SCS4000 is an efficient machine for applying conformal coatings for various applications. It improves productivity by allowing the selective coating of areas without the need for time-consuming masking. Quality of spray is repeatable and coating can be applied especially thin or thick.

SCS4000 is a fully programmable selective coating system with user-friendly proprietary software to perform any intricate patterns that are needed for a good coating process. It also has a programmable tilt and rotate function to access most areas. Together with the gantry system and the spray valve, the system can deliver an even coated area with a maximum of approximately 0.01mm*.

Friendly features for area coating allows for fast programming. Dry runs after programming allow user to check position without actual spraying. Valves are easy to service and maintain. There is no expensive replacement part.

Features

  • Material and substrate dependant
  • Ease of programming with PC-based Software
  • Purging stations for material
  • Low atomising pressure
  • Strong internal exhaust with overspray chamber for fume
  • Low level sensor for material
  • Material tank with low level sensor
  • Vision option for Fiducial check and X/Y programming

Specification

Working Area400 x 400 x 100mm
Under Board Clearance60mm
PCB Edge Clearance3 – 5mm
Conveyor TypeChain Conveyor
Conveyor AdjustmentManual
Programming MethodPC Based Software
Program CapacityUnlimited
MotorAC Servo Motor
Drive SystemBall Screw Drive
Maximum Speed800 mm/sec
Resolution±2μm per axis
Repeatability±10μm per axis
Dual HeadDispense / Dot and Spray
Tilt & RotateSpray only
Black Light (Inspection)1 x 24 inch Lamp
Air Supply5 / 6 Bar
Power230VAC, 50Hz, 15Amp
Dimension (W x D x H)1050 x 1230 x 1735 mm
Weight Approx.600 kg